Finger disc rotary rake tractor hay rake grass collecting machine
This series of hay rake is matched with four-wheel tractor.The working part is a couple of finger discs with raked teeth.The machine passes the grasses from one finger disc to the next in sequence until rakes the grasses to a loosely and ventilated strips.
The material of tines is 65Mn spring steel to keep durable and it has good combing effect and strong contouring performance.The tines are radiated,can eliminate the influence of wind and facilitate the passage of dust.The tension spring is used to control the pressure of the finger disc on the ground, and the pressure can be adjusted by stretching the adjustment plate according to the conditions of the crop and the ground. During transportation, the finger discs can be turned to the rear of the tractor.
This machine has simple structure, convenient operation, reliable use, few failures, high efficiency,good operation quality,easy maintenance and good power matching performance.It not only can rake but also can turn the grasses(the grass strips can be spread out again).
| Model |
Unit |
9GLZ-3.0 |
9GLZ-4.0 |
9GLZ-4.8 |
| Working width |
m |
3 |
4 |
4.8 |
| Width of grass strips |
m |
0.9-1.2 |
1-1.3 |
1-1.5 |
| Diameter of finger disc |
m |
1.46 |
1.46 |
1.46 |
| No. of finger disc |
|
4 |
6 |
8 |
| Total weight |
kg |
150 |
295 |
345 |
| Matched power |
hp |
15-30 |
20-50 |
40-80 |
| Linkage |
|
Three-point suspension |
Web:lianshengmachinery.en.made-in-china.com
Yucheng Liansheng Machinery Co.,Ltd.
Yucheng City,Shandong Province, Chi
Audited Supplier 
){kind=link}